Trinocular Inverted Metallurgical Microscope-Model Met Hybrid

Trinocular Inverted Metallurgical Microscope Hybrid

Trinocular Inverted Metallurgical Microscope Hybrid

Trinocular Inverted Metallurgical Microscope Hybrid are effectively used in industries, quality control, pharma, textile, gem, automobile, engineering, universities, colleges and research Institutes.

BODY Construction
a) Co-axial focusing system with large knobs, PRE-FOCUSING LEVER & TENSION
ADJUSTMENT RING.
b) Reverse Angle quadruple nose piece on ball bearing.
c) Mechanical stage is 242mmX172mm.
d)The Mechanical stage has low positioned co-axial controls on ball bearing guide ways.
e)Hand rests on both sides.

TRINOCULAR HEAD
Siedentopf observation head inclined at 30° rotatable at 360°.
Diopter adjustment ring on ocular tube.
Interpupillary distance from 48mm to 75mm.

EYEPIECE
Wide field eyepiece 10X (Paired) FOV 22mm

OBJECTIVES (INFINITY CORRECTED)

  • M Long Working Distance Plan Achromatic 5X
  • M Long Working Distance Plan Achromatic 10X
  • M Long Working Distance Plan Achromatic 50X ( S L )
  • M Long Working Distance Plan Achromatic 80X ( S L ) Dry

ILLUMINATOR
The Epi illuminator has 6V-20W halogen lamp, adjustable brightness.

POLARIZING OUTFIT
Analyser rotatable 360o. Polarizing & Analyser can be slided in/out of the optical path..

STANDARD ACCESSORIES
6V/20W Halogen tungsten bulb. Blue, Green & Yellow filters. STYRO FOAM  molded pack.

Send us mail